Home  |  High-End Audio Reviews  Audiophile Shows  Partner Mags  Hi-Fi / Music News

High-End High-Performance Audiophile Review Magazine & Hi-Fi Audio Equipment Reviews
Audiophile Equipment Review Magazine High-End Audio

  High-Performance Audio Reviews
  Music News, Show Reports, And More!

  29 Years Of Service To Music Lovers

 

July 2000
Enjoy the Music.com Review Magazine
Cease and Resist - A "Courting" Order

By Steven R. Rochlin
Click here to e-mail reviewer

Proper Electrical Plug Orientation

  So you're introducing that shiny new sexy amplifier to your preamplifier yet somethin's unhappy. They seem to fight each other day after day and you're not sure what to do. Well, you may wanna see if they're just resisting each others "love vibe". This little ditty below discusses how to enhance your systems love life through less resistance.

So here what cha need for this ditty: Just a simple multimeter that can measure DC resistance and a few "cheater plugs". Cheater plugs are available at most Home Depots, electrical supply huts, and even Radio Shack (known as Tandy to my European friends). File down the larger male prong on the cheater plug so that BOTH prongs are the same height. This way you can reverse the electrical phasing of the electrical plug of your component(s) by using this re-engineered cheater plug.

Now please unhook all your components from each other so that we are ONLY measuring the DC resistance of one component at a time which IS NOT connected to anything else. Please electrically plug in the component you want to test and do the following:

Turn on the product we are testing and give it a few moments to get warm and happy. Set your multimeter to DC resistance and insert one of the test probes to the GROUND of your electrical outlet (the rounder lookin' thing usually on the bottom for us American folks) . Then place the other probe so that it touches one of the OUTSIDE PART of the analogue audio RCAs. WRITE DOWN the DC resistance your meter sez. Now turn off the component and use the cheater plug to reverse the electrical phase of the component. Turn the component back on and again test the DC resistance. Whichever measurement is LOWER is usually the best. Now simply repeat this for every component in your music reproduction system.

REMEMBER, there are no "hard and fast" rules here so one component may subjectively reproduce music better with higher DC resistance. Like some love affairs, a little more resistance may actually be a good thing! In the end, let your ears decide which electrical phase makes the "love vibe" work.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

     
 

Quick Links


Premium Audio Review Magazine
High-End Audiophile Equipment Reviews

 

Equipment Review Archives
Turntables, Cartridges, Etc
Digital Source
Do It Yourself (DIY)
Preamplifiers
Amplifiers
Cables, Wires, Etc
Loudspeakers/ Monitors
Headphones, IEMs, Tweaks, Etc
Superior Audio Gear Reviews

 

 


Show Reports
Capital Audiofest 2024
Toronto Audiofest 2024
UK Audio Show 2024
Pacific Audio Fest 2024
HIGH END Munich 2024
AXPONA 2024 Show Report
Montreal Audiofest 2024 Report

Southwest Audio Fest 2024
Florida Intl. Audio Expo 2024
Capital Audiofest 2023 Report
Toronto Audiofest 2023 Report
...More Show Reports

 

Videos
Our Featured Videos

 


Industry & Music News

High-Performance Audio & Music News

 

Partner Print Magazines
audioXpress
Australian Hi-Fi Magazine
hi-fi+ Magazine
Sound Practices
VALVE Magazine

 

For The Press & Industry
About Us
Press Releases
Official Site Graphics

 

 

 

   

 

Home  |  High-End Audio Reviews  |  Audiophile Show Reports  Hi-Fi / Music News  About Us  |  Contact Us

 

 

All contents copyright©  1995 - 2024  Enjoy the Music.com®
May not be copied or reproduced without permission.  All rights reserved.